- Home
- >
- Hydraulic Lifting Equipment
- >
- Sleeve Type Aerial Work Platform
- >
- OSEN Telescopic Mast Aerial Work Platform — Core Features
OSEN Telescopic Mast Aerial Work Platform — Core Features
Osen‑Lift steel telescopic mast lift adopts self‑propelled structure with compact size. Perfect for narrow‑space indoor aerial working, multiple working heights for your selection.
- Description
OSEN telescopic mast aerial work platforms combine custom‑build capability, cost‑effective manufacturing, superior safety performance and full‑lifecycle support.
| 型号 | ML3.6E | ML4.8E | ML6.0E | ML9.2J |
| 最大工作高度 | 5.6m | 6.8m | 8.0m | 11.2m |
| 最大平台高度 | 3.6m | 4.8m | 6.0m | 9.2m |
| 安全工作载荷 | 227kg | 227kg | 159kg | 200kg |
| 延伸平台安全工作载荷 | 114kg | 114kg | 114kg | / |
| 整机长度 | 1.36m | 1.36m | 1.36m | 2.53m |
| 整机宽度 | 0.76m | 0.76m | 0.82m | 1.0m |
| 整机高度 | 1.7m | 1.98m | 1.98m | 1.99m |
| 工作平台尺寸 | 1.3*0.7*1.1m | 1.3*0.7*1.1m | 1.3*0.7*1.1m | 0.62*0.87m |
| 最小离地间隙(收拢状态) | 0.1m | 0.1m | 0.1m | / |
| 最小离地间隙(起升状态) | 0.023m | 0.023m | 0.023m | / |
| 轴距 | 1.04m | 1.04m | 1.04m | 1.22m |
| 机器行驶速度(收拢状态) | 4km/h | 4km/h | 4km/h | 4.5km/h |
| 机器行驶速度(起升状态) | 1.1km/h | 1.1km/h | 1.1km/h | 0.5km/h |
| 最大爬坡能力 | 25% | 25% | 25% | 25% |
| 工作最大允许角度 | 1.5° | 1.5° | 2° | X-2.5°, Y-2.5° |
| 整机重量 | 810kg | 980kg | 1060kg | 2950kg |
主要配置清单：
| 比例控制 | 自动刹车系统 | 蜂鸣器 | 延伸平台 |
| 自动坑洞保护系统 | 紧急下降系统 | 喇叭 | 充电保护系统 |
| 平台自锁门 | 紧急停止按钮 | 工作时间表 | 防夹手保护系统 |
| 倾斜保护系统 | 油管防爆系统 | 刹车释放 | 4×2驱动 |
| 无痕轮胎 | 故障诊断系统 | 标准运输叉车孔 | 频闪灯 |
Flexible Customization
Standard working height ranges from 6 m to 28 m. Non‑standard customization is available according to working height, load capacity and site conditions to fit various application scenarios.
Cost‑effective Mass‑produced Solutions
Modular design and large‑scale production deliver competitive pricing from $7,000‑$42,000 for diverse budget levels. Over 2,000 units delivered in past three years with 45% repeat‑purchase rate, proving solid market recognition.
Advanced Technology & Safety Protection
Adopt high‑strength aluminum alloy construction: 30 % lighter than conventional steel structures while load capacity increases by 15 %. Equipped with intelligent anti‑tilt and overload protection for real‑time equipment monitoring.Annual R&D investment exceeds 8 % of revenue. Digital production enables full‑process traceability with 99.5 % product qualification rate.New‑generation electric model runs 8 hours after 1‑hour charging with 20 % lower energy consumption, widely deployed in large‑scale logistics centres.
Complete Full‑life‑cycle Service
Pre‑sales technical consultation & solution design; in‑sales installation, commissioning & operator training; after‑sales scheduled maintenance and rapid fault response to guarantee long‑term stable equipment operation.